What hydro jetting actually does that a snake cannot. A drain snake or auger punches a hole through a blockage and moves on. It clears the immediate clog but leaves whatever coats the pipe walls largely in place, which is why a snaked line often slows down again within months. Hydro jetting works differently. A high-pressure water nozzle scours the full interior surface of the pipe, removing grease, scale, sediment, and the smaller root fragments that a snake pushes past rather than removes. That distinction matters most in lines with a history of recurring problems. Grease buildup in a kitchen line, mineral scale in an older cast iron pipe, or years of sediment settling along the bottom of a line with a slight pitch issue all respond better to jetting than to mechanical clearing alone. The pressure is calibrated to the line's condition, since jetting a pipe that is already compromised by cracks or severe corrosion can do more harm than good. That is why we always run a camera inspection before jetting a line we have not already assessed. A pipe in reasonably sound condition handles jetting well. A pipe with structural damage needs a different approach first, whether that is a patch or trenchless lining, before jetting makes sense as a maintenance step.
Hydro jetting fits a specific set of situations well, and knowing which one applies to your line helps set the right expectations before a technician arrives.
If a kitchen or laundry line backs up every few months despite regular snaking, grease or scale buildup along the pipe walls is a likely cause that jetting addresses directly.
When several drains on the same branch line run slow at once, sediment or scale narrowing the shared line is a common explanation.
After root removal clears the immediate intrusion, jetting flushes out the smaller root fragments and debris left behind, which reduces how quickly the problem returns.
Jetting a line on a schedule, rather than waiting for a backup, catches buildup before it becomes a clog that disrupts the household or a tenant.
Grease trap and kitchen drain lines in restaurants and food-service properties accumulate buildup faster than residential lines and benefit from more frequent jetting.
For contractors working on construction or plumbing projects, hydro jetting provides an effective way to clear sewer and drain lines before additional work begins. By removing buildup and restoring proper pipe flow, hydro jetting helps ensure that sewer infrastructure is functioning correctly. Clean pipes can also make inspections more accurate and reduce the risk of blockages interfering with project progress.
How a hydro jetting visit works, from your first call to a verified, clear line.
Tell us whether the issue is a recurring clog, slow drainage, or a preventative maintenance visit, so we know what to expect before arriving.
A camera inspection comes first if the line's condition is unknown. We confirm the pipe can handle jetting safely before recommending it, especially on older or previously unassessed lines.
The jetting equipment is calibrated to the line. Pressure and nozzle selection are matched to the pipe's material, diameter, and condition to clear buildup without causing damage.
The line is jetted from end to end. The nozzle works through the full run, scouring the interior walls rather than punching through a single blockage point.
A follow-up camera pass confirms the result. We verify the line is genuinely clear, not just temporarily flowing, before calling the job complete.
Two decades of sewer-only experience across the greater Seattle area. Jetting the wrong line, or jetting the right line with the wrong pressure, can turn a maintenance visit into a real problem. Seattle Select Sewers has worked nothing but sewer and drain systems since 2005, which means our technicians know how to read a line's condition before recommending jetting, not after something goes wrong. We are fully licensed and bonded with Washington State Labor & Industries, License #SEATTSS874JJ, and we carry full liability coverage on every job. That matters for commercial properties in particular, where a grease trap or kitchen line failure can shut down operations if it is not handled correctly. We do not default to jetting every job that walks in the door. If a camera inspection shows a line that needs a patch or trenchless lining first, we say so before running a jetter through it. Jetting works best as part of a plan, not as a first response to every slow drain.
We don't do HVAC, plumbing, landscaping, or anything else. Every technician on our team has spent years working exclusively on sewer systems in the Seattle area.
Sewer issues are never fun. From inspection to repair, you'll have the best in the business solving your problems.
Full replacement of a sewer line is rarely the answer. Cure-in-place-pipe (CIPP) lining lasts for 40+ years and is typically completed in a couple days, all while keeping your sewers in service.
Most repairs wrap up in a single day. We give you a realistic schedule upfront — not a vague "it depends" answer — so you can plan accordingly.
We're called on regularly by Seattle-area agents and home inspectors to provide sewer scopes before sale. Our reports are clear, detailed, and defensible.
Fully licensed & bonded with Washington State Labor & Industries (L&I License #SEATTSS874JJ) and carrying full liability coverage on every job.
Hydro jetting service is dispatched from our Redmond office at 5806 216th Pl NE, Redmond, WA 98053 to homes and light-commercial properties throughout the greater Seattle area. Our coverage includes Seattle, Redmond, Bellevue, Bothell, Shoreline, Mountlake Terrace, Everett, Renton, Burien, Kent, Kirkland, Kenmore, Lynnwood, Edmonds, Ballard, Tukwila, SeaTac, and Mercer Island. If your city is not listed here, call 425-531-4847. We confirm coverage and the earliest available appointment by address.
Diagnostic inspections that confirm a line's condition before jetting, lining, or any other repair.
Scheduled upkeep, including jetting on a recurring basis, that catches buildup before it becomes a clog.
Documented camera passes on new lateral runs before a project closes out.
A clear, documented look at a line's condition before closing on a property.
Cure-in-place-pipe lining for lines that need structural repair rather than cleaning alone.
Targeted fixes for a single failed joint or localized crack.
Clearing established root intrusion before jetting flushes out the remaining debris.
Diagnosis and repair when a blockage points to a cause beyond routine buildup.
Proper tie-ins for properties gaining new access to a municipal sewer main.
Schedule hydro jetting in Seattle and the Puget Sound. A drain that keeps slowing down despite regular snaking usually needs more than another quick fix. Hydro jetting clears the buildup that causes the pattern in the first place, and a camera inspection confirms your line is a good candidate before we start. Seattle Select Sewers handles hydro jetting for homes and light-commercial properties throughout Seattle and the greater Puget Sound region. Call 425-531-4847 or use the form below to schedule service.