Seattle's Sewer Lining Specialists · Since 2005
Sewer Repair in Bellevue, WA | Seattle Select Sewers
Bellevue sits across Lake Washington from Seattle in King County, and its homes range from post-war ramblers to brand new rebuilds. That range matters for sewer line repair in Bellevue, because the pipe under your yard usually dates to when your house went up. An older Bellevue home on a big lot under mature firs may still have its original clay or concrete side sewer. A newer home may have plastic pipe that has sagged or taken roots at a fitting. Seattle Select Sewers has repaired sewer lines in Bellevue since 2005, and every job starts with a camera so you see the problem before anyone talks about a fix.
We are sewer-only specialists. We focus on sewer repair and maintenance, nothing else. Our first choice is trenchless repair, because digging up the whole line is rarely the answer, and most Bellevue sewer repairs are done in a single day.
What we see in Bellevue
Bellevue is a city of distinct neighborhoods, and each tends to have its own sewer story.
- Lake Hills and Crossroads: many mid-century ramblers and split-levels still on their original side sewer. A side sewer is the private pipe that carries waste from your house to the public main. In homes this age we often find clay or concrete pipe with root-packed joints, or Orangeburg, a fiber pipe used from roughly the mid-1940s to the 1970s that softens and flattens over time.
- Somerset and Newport Hills: sloped lots and longer pipe runs. Ground that shifts over the years can open joints or pull a section out of line, which shows up on camera as an offset.
- Around Factoria: established streets with big trees close to the house, where roots follow the line from the foundation out to the street.
- West Bellevue: large lots, mature landscaping and a steady stream of remodels and rebuilds. A rebuild is the right time to scope the old side sewer, before it ends up under a new driveway.
The weather does the rest. Through the wet season, steady rain soaks the glacial till and clay-rich soil that underlie much of the Eastside, and that soil drains slowly. Saturated ground stresses old joints, and roots from big-leaf maples, Douglas firs and cedars push toward the moisture inside your pipe. That is why many Bellevue homeowners first notice trouble in winter: a slow tub, a gurgling toilet or water around a basement floor drain.
Sewer repair services in Bellevue
- Trenchless sewer repair (CIPP lining): CIPP means cure-in-place pipe. We pull a resin-soaked liner into the old pipe and harden it in place, creating a new pipe inside the old one with 40 or more years of service life.
- Sewer pipe patches: a short liner that seals one cracked joint or root entry point when the rest of the line is sound.
- Root removal and hydro jetting: cutting roots out and scouring the pipe walls with high-pressure water.
- Sewer cleanout installation: a cleanout is a capped access pipe outside the house that lets us reach the line without pulling a toilet.
- Camera inspections and locating, including pre-sale scopes for buyers and agents.
- Septic-to-sewer conversion for properties moving off a septic system.
Our process
- Call or submit a request. Call 425-531-4847 or send a request online and tell us what you are seeing at your Bellevue home.
- Camera inspection. We run a camera through the line and show you the footage: roots, cracks, sags, offsets or a collapse.
- Written estimate. You get a written estimate with your options explained, from a patch to full lining, before any work begins.
- Complete repairs. We do the work, most often in one day, and show you the finished pipe on camera.
Why Homeowners Choose Us
Why Bellevue homeowners call us
Licensed and bonded, WA L&I #SEATTSS874JJ, with full liability coverage on every job.
Sewer-only specialists since 2005.
20-year warranty on completed repairs.
Trusted by local realtors and home inspectors for pre-sale sewer scopes.
No exaggerating. No unnecessary work. If a patch will do, we say so.
Proudly Serving the Puget Sound
Nearby areas we serve
We also work in Kirkland and Mercer Island. For more local reading, see common sewer repair myths Bellevue homeowners should stop believing.
Areas We Serve
Mountlake Terrace
Renton
Kent
Magnolia
Kenmore
Lynnwood
Ballard
Fremont
SeaTac
Tukwila
FAQ
Bellevue sewer repair FAQs
How much does sewer line repair cost in Bellevue?
It depends on the length and depth of the line, the pipe material, and whether one patch or a full liner is needed. The camera inspection answers those questions, and the estimate is free and written before any work starts.
Can you repair my sewer line without digging up the yard?
Usually, yes. Trenchless sewer repair works through a cleanout or small access point, so lawns, patios and driveways stay put. If the pipe has collapsed, we will show you why a dig is needed.
How long does sewer line repair take?
Most repairs are finished in a single day. Larger lining jobs can take a couple of days.
Who is responsible for the sewer line on a Bellevue property?
The private side sewer from the house generally belongs to the property owner. Check with your city or local sewer utility to confirm where your part ends. We tell you in the written estimate whether your job needs a permit.
Should I scope the sewer before buying a home in Bellevue?
Yes, especially in older neighborhoods with mature trees. A scope costs far less than a surprise repair after closing, and realtors and inspectors call us for exactly this.
Testimonials
What Our Customers Say
Call 425-531-4847 for sewer repair in Bellevue, WA.
Free estimates, written before any work begins.